Fiber Type & Grade
OS2 single mode for reach and bandwidth; OM3, OM4, OM5 multimode for data center and enterprise. The fiber sets the link's ceiling.
Fiber Optic Cables
Every network begins with the glass that carries the light. Fiber optic cables are the physical backbone of fiber-optic communication — the medium that has to survive the conduit, the duct, the trench, and the equipment room while keeping loss low for decades.
Aevumix is a fiber optic cables manufacturer with 16 years of experience, supplying single mode and multimode cable across indoor, outdoor, and backbone constructions to distributors, installers, and OEM brands worldwide.
The range spans indoor patch and distribution cable, outdoor and armored cable for duct and aerial routes, and the fiber types your customers specify — OS2 single mode and OM3, OM4, and OM5 multimode. Every construction is open to OEM and ODM supply.
OEM / ODMprivate-label print, packaging, and reel labels
Full rangeindoor, outdoor, and armored fiber optic cables
SM & MMOS2 single mode, OM3/OM4/OM5 multimode
Custom buildsfiber count, jacket, and length to spec
Featured Products
No products in this category yet. Please check back soon or contact us for availability.
Related Categories
Explore related categories across industry, application, and performance attributes.
Cable Types and Construction
Choosing the Right Fiber Optic Cables for the Route
The right fiber optic cables are decided by where they run and what they carry. The fiber type comes first: OS2 single mode for long reach and high bandwidth, and OM3, OM4, or OM5 multimode for shorter, cost-sensitive data center and enterprise links. Get this wrong and the link is limited before it is even installed, so it is the specification every buyer confirms up front.
Then comes construction, which the environment dictates. Indoor cable uses riser or plenum-rated jackets for safe routing through buildings; outdoor cable adds water-blocking, UV-resistant jackets and strength members for duct and aerial runs; and armored cable wraps the fibers in steel or dielectric protection where rodents, crush, or harsh conditions threaten.
Fiber count scales from a simplex patch lead to high-count backbone trunks. Match fiber type, jacket, armor, and count to the route, and the cable performs for the life of the network.
OEM / ODM Programs
Fiber Optic Cables Configured by the Manufacturer
Because every network is specified differently, customisation starts with the build. As a fiber optic cables manufacturer and supplier, we configure the fiber type and grade (OS2, OM3, OM4, OM5), the fiber count, the jacket material and rating (LSZH, PVC, riser, plenum), and the armor and strength members to the route and standard your customers run.
The brand and format layer is complete. Jacket print and legend, reel and drum labels, cut lengths and packaging, and connectorised assemblies where required all ship as your product.
Whether a buyer needs indoor distribution cable, outdoor armored trunk, or pre-terminated assemblies, it arrives private-label from the factory, at wholesale pricing and a workable MOQ, with samples to validate performance before volume.
OEM & ODM Support
Need Custom Fiber Optic Cables?
Don't See Your Spec? We'll Engineer It.
Tell us the fiber type, jacket rating, armor, fiber count, and length your customers need. We will match it to a cable build for your route and your brand.
- Samples available for qualified buyers
- Flexible MOQs for pilot runs and bulk orders
- Full OEM / ODM: fiber, jacket, print, packaging
24htypical response
16+years experience
40+export countries
NDA available · ISO-aligned production · English & technical support
What Defines Reliable Fiber Optic Cables
Six factors decide whether a cable performs for the life of the link. Use them to frame an OEM brief.
Jacket & Fire Rating
LSZH, PVC, riser, and plenum jackets matched to indoor code requirements or outdoor UV and moisture exposure.
Armor & Protection
Steel or dielectric armor and water-blocking for duct, direct-burial, aerial, and rodent-prone routes.
Fiber Count
From simplex and duplex leads to high-count backbone trunks — sized to current need and future headroom.
Attenuation & Bandwidth
Low, consistent attenuation and rated bandwidth are what the whole cable exists to deliver, batch after batch.
Mechanical Durability
Tensile strength, crush and bend performance, and strength members that let the cable survive installation and service.
From Inquiry to Bulk Supply
Inquiry & Specification
Share the fiber type, jacket, armor, count, and length your customers need; we confirm the cable build.
Engineering & Configuration
We set fiber grade, jacket, and armor, then align OEM print, reel labels, and packaging to your brand.
Sample & Validation
Samples let you verify attenuation and mechanical performance before volume.
Bulk Production
Stable manufacturing with consistent QC, flexible MOQs, and global logistics for ongoing supply.
Why Source Fiber Optic Cables from Our Factory
Performance That Lasts
Low, consistent attenuation and durable construction mean the cable performs for the life of the network — the only measure that counts.
Genuinely Full OEM / ODM
Fiber, jacket, print, and packaging all ship under your brand — a private-label cable line, not re-badged reels.
One Source, Full Range
Indoor, outdoor, and armored cable in single mode and multimode from one manufacturer simplifies sourcing for contractors and distributors.
Support That Answers
A real engineer, usually within a business day, for distributors and installers in 40+ countries.
Frequently Asked Questions
Indoor patch and distribution cable, outdoor and armored cable for duct and aerial routes, and backbone trunks — in OS2 single mode and OM3, OM4, and OM5 multimode. We build to your fiber count, jacket, and length.
Single mode (OS2) carries light in one path for long reach and high bandwidth; multimode (OM3/OM4/OM5) suits shorter data center and enterprise links at lower system cost. We supply both and help you match the fiber to the link.
Yes. We build outdoor cable with UV-resistant, water-blocked jackets and steel or dielectric armor for duct, direct-burial, aerial, and rodent-prone routes, with strength members sized to the installation.
LSZH, PVC, riser, and plenum jackets to match indoor fire-code requirements and outdoor environmental exposure. Tell us the standard your market requires and we configure the jacket accordingly.
Fully. Jacket print and legend, reel and drum labels, cut lengths, and packaging all carry your brand — a private-label cable line at a workable MOQ.
Yes. We provide connectorised assemblies and pre-terminated cable alongside bulk cable, so you can source both raw reels and ready-to-install leads from one factory.
Fiber attenuation, geometry, and mechanical performance are verified to specification, with batch records available. Consistent, documented quality is what lets you certify the links built from our cable.
Request a Quote
Tell us about your application and we will respond with material recommendations, sample options, and pricing as soon as possible.