We needed inspection tools that grade to IEC 61300-3-35 consistently across our sites. This range delivers repeatable pass/fail results, so acceptance no longer depends on who is holding the probe. Documentation supports our audits well.
LED Light Source for Fiber Optic
LED light sources for fiber optic multimode loss testing — stable, multi-wavelength output paired with a power meter. Request a quote.
Product Details
An LED light source for fiber optic testing provides the stable, broad-mode launch that multimode loss measurement needs. Where single-mode certification uses a laser, multimode testing typically uses an LED because its mode fill gives representative, repeatable loss readings on multimode fiber. A stable LED source paired with a power meter is the standard way to measure insertion loss on multimode links in LANs and data centers.
Aevumix supplies LED light sources engineered for stable output at the common multimode wavelengths, matched to our power meters so the wavelengths align for accurate dB results. Consistent launch conditions give repeatable loss figures across a build, and multi-wavelength models cover the windows a multimode network is tested at. For controlled measurements some setups also call for defined launch conditions — tell us your standard and we will advise.
Because the right LED source depends on your wavelengths, fiber type and standard, we help you specify the correct unit. Send your requirements and we will recommend an LED light source and provide a quote.
About this item
- Stable LED launch for multimode loss testing
- Representative, repeatable multimode readings
- Multi-wavelength models for common windows
- Matched to our power meters for accurate dB results
- Consistent launch conditions across a build
- For LAN and data-center multimode links
- Rugged, battery-powered field design
| Wavelength | 1310/1550nm |
|---|---|
| output power | -5dB |
| Output Stability | ±0.05dB/15mins; ±0.1dB/ 8hours |
Based on 10 customer reviews
A loss test is only as good as the source stability. These light sources hold their output with low drift, so our loss readings are the link, not the instrument. Consistent performance across every unit we have tested.
The stable light source gives me a reference that does not wander between readings, so my loss numbers hold up. The tone output helps identify fibers in a bundle too. Handy, reliable, and built for the field.
Request a Quote
Tell us what you need and our team will get back to you with pricing and availability as soon as possible.
Related Products
Fiber Light Sources
Fiber Optic Cable Light Source
Stable fiber optic cable light sources for insertion loss testing paired with a power meter — laser and LED. Request a quote.
Fiber Light Sources
Fiber Light Source Pen
Fiber light source pens — pocket visible-light sources for fast continuity checks and fiber tracing in the field. Request a quote.
Related Blog Posts
Knowledge
Which Light Sources Cannot Be Used in Fiber Optic Systems?
Incandescent and thermal lamps cannot be used in fiber optic systems. Learn why, what a fiber source must do, and the special case of the LED.
Knowledge
What Are the Light-Emitting Sources Used in Fiber Optics?
The light-emitting sources used in fiber optics are LEDs, laser diodes, and VCSELs. Learn how each works, the coherent vs incoherent distinction, and which fiber each suits.
Blog
How to Use an Optical Power Meter: A Beginner’s Guide
How to use an optical power meter to measure fiber power and loss: cleaning, wavelength matching, setting the reference, reading dBm vs dB, and avoiding mistakes.
Frequently Asked Questions
An LED's mode fill gives representative, repeatable loss readings on multimode fiber, which is why multimode testing typically uses an LED while single-mode certification uses a laser.
Single-mode certification generally uses a laser source for its narrow, stable output. For single-mode work tell us and we will recommend a laser source instead.
Yes. The source wavelengths must match the meter's calibration for accurate loss testing. We supply matched sets or confirm compatibility with your meter.
Some multimode standards specify defined launch conditions for consistent results. Tell us your standard and we will advise on the right source and any conditioning.
Add a review