We tested several suppliers before standardizing on this cleaning range. It leaves no lint and no residue, so our re-inspection pass rate is high. Batch consistency has been reliable, which is what my role cares about most.
Fiber Optic Connector Cleaner
Fiber optic connector cleaners that remove dust and oil from end-faces to cut insertion loss and reflectance — cassette and push formats. Request a quote.
Product Details
A fiber optic connector cleaner removes the dust and oil on a connector end-face that is the single most common cause of insertion loss, reflectance faults and failed acceptance tests. A micron of dust on the core scatters light; oil from a fingertip spreads under mating pressure and can pit the ferrule. A dedicated connector cleaner removes these contaminants safely — something compressed air and household wipes cannot reliably do.
Aevumix supplies fiber optic connector cleaners in the formats real work needs: reel-fed cassettes for exposed connectors and push-type cleaners for connectors mated inside bulkheads. Sized for 2.5mm (SC, FC, ST) and 1.25mm (LC, MU) ferrules, our cleaners use lint-free, static-dissipative material that lifts contamination without scratching the ceramic end-face. Within the inspect-clean-inspect workflow, the connector cleaner is what turns a failed end-face inspection into a pass.
Whether for a single kit or bulk supply, we deliver consistent, documented cleaners with fast quotes. Tell us your connector mix and we will recommend the correct cleaners and quantities.
About this item
- Removes dust and oil that drive up loss and reflectance
- Cassette and push-type formats for every connector
- Sized for 2.5mm and 1.25mm ferrules
- Lint-free, static-dissipative — no scratching, no debris
- Hundreds of cleans for a low cost per connection
- Supports the inspect-clean-inspect workflow
- Available individually or in bulk
Based on 10 customer reviews
Having dry, wet and combination cleaning across LC, SC and MPO in one range means our crews never skip cleaning for lack of the right tool. Well thought out, and the quality has held up in daily field use.
A contaminated end face used to mean a return visit; now the one-click cleaner sorts it in seconds. It reaches connectors seated deep in panels and never sheds lint. It lives in my kit permanently now.
Request a Quote
Tell us what you need and our team will get back to you with pricing and availability as soon as possible.
Related Products
Fiber Optic Cleaner
Fiber Optic Splice & Connector Cleaner
Cleaners for both bare fiber before splicing and connector end-faces — keeping splice loss and insertion loss low. Request a quote.
Fiber Optic Cleaner
One-Click Fiber Cleaner
One-click fiber cleaners that clean mated bulkhead connectors with a single push — fast, consistent, hundreds of cleans. Request a quote.
Fiber Optic Cleaner
Fiber Optic Port Cleaner
Fiber optic port cleaners that clean transceiver and bulkhead ports in place — reaching the recessed ferrule a wipe cannot. Request a quote.
Related Blog Posts
Blog
How to Clean a Fiber Connector With a Lint-Free Wipe
How a fiber connector should be cleaned with a lint-free wipe: the dry and wet-to-dry methods, the straight-pull motion, and the mistakes to avoid.
Blog
How to Use a One-Click Fiber Cleaner: Step-by-Step Guide
A step-by-step guide to using a one-click fiber cleaner correctly for connectors in adapters and on patch cords, plus troubleshooting and care tips.
Blog
Fiber Optic Cleaner Pen: How to Use It Correctly
How to use a fiber optic cleaner pen (one-click cleaner) correctly for connectors in adapters and on patch cords, with technique, tips, and troubleshooting.
Frequently Asked Questions
A micron-scale particle on the core causes measurable loss and can pit the end-face under mating pressure. A dedicated cleaner removes contamination without scratching the ferrule — unlike air or household wipes.
Cassettes clean exposed connectors quickly; push-type cleaners reach connectors mated inside bulkheads. Most technicians carry both. Tell us your work and we will recommend the mix.
By ferrule size: 2.5mm for SC, FC, ST; 1.25mm for LC, MU. MPO needs a dedicated cleaner. Send your connector mix for the correct tools.
Yes. We supply connector cleaners in volume with consistent specification. Send your quantities for a quote.
Add a review